Dyes and Labeling Reagents

This category comprises chemicals for permanent and temporary labeling of organelles, proteins, and other molecules. For example, this includes the covalent linkage of a target protein, such as an antibody, with a fluorescent dye/fluorophore, allowing detection of the target protein in microscopic experiments. For the purpose of detection, proteins can also be coupled with reporter enzymes (e.g. HRP) or radioactive isotopes. To facilitate the purification of a target protein, biotinylation followed by streptavidine affinity binding has proven to be effective.

This category comprises chemicals for permanent and temporary labeling of organelles, proteins, and other molecules. For example, this includes the covalent linkage of a target protein, such as an... read more »
Close window
Dyes and Labeling Reagents

This category comprises chemicals for permanent and temporary labeling of organelles, proteins, and other molecules. For example, this includes the covalent linkage of a target protein, such as an antibody, with a fluorescent dye/fluorophore, allowing detection of the target protein in microscopic experiments. For the purpose of detection, proteins can also be coupled with reporter enzymes (e.g. HRP) or radioactive isotopes. To facilitate the purification of a target protein, biotinylation followed by streptavidine affinity binding has proven to be effective.

43 from 269 pages
No results were found for the filter!
Ponceau S (sodium salt)
Ponceau S (sodium salt)

Item number: Cay14330-25

Ponceau S is a stain that permits the rapid, reversible detection of proteins immobilized on various matrices, including nitrocellulose and polyvinylidene fluoride membranes. It can be used to locate proteins or evaluate efficiency of transfer. Reversible staining with ponceau S has also been validated as an...
Keywords: Acid Red 112, 3-hydroxy-4-[2-[2-sulfo-4-[2-(4-sulfophenyl)diazenyl]phenyl]diazenyl]-2,7-naphthalenedisulfonic acid,...
Application: Protein staining
CAS 6226-79-5
MW: 760.6 D
From 58.00€ *
Review
AATOM(TM) 488 NHS ester
AATOM(TM) 488 NHS ester

Item number: ABD-2815

AATOM(TM) 488 is a rhodamine-based fluorescent label. Unlike other AATOM(TM) dyes, it has excellent water solubility. It has good spectral properties useful for fluorescence imaging applications, including strong absorption, high fluorescence quantum yield and high photostability. AATOM(TM) 488 is highly suitable...
Application: Amino-containing molecule labeling, PALM, dSTORM, STED, FC, FISH
MW: 787.86 D
145.00€ *
Review
CellBrite(TM) Orange Cytoplasmic Membrane Dye
CellBrite(TM) Orange Cytoplasmic Membrane Dye

Item number: BOT-30022

CellBrite(TM) Cytoplasmic Membrane Labeling Kits are designed to label cell cytoplasmic membranes with fluorescent dyes, available in blue, green, orange, and red. The labeling is stable and nontoxic, suitable for long-term tracking of cells. By combining multiple CellBrite(TM) Cytoplasmic Membrane Stains, one can...
235.00€ *
Review
NucSpot(R) Live 650, 1000X in DMSO
NucSpot(R) Live 650, 1000X in DMSO

Item number: BOT-40082

NucSpot(R) Live 650 nuclear Stain is a far-red fluorescent (Ex/Em 650/675 nm) DNA dye that stains nuclei in live or fixed cells. It has low toxicity for live cell imaging and is compatible with super-resolution imaging by STED and SIM. The Supplied as a 1000X stock solution in DMSO.
Keywords: nuclear, dna, live cell, dye, stain, dapi, hoechst, SIR-DNA, SYTO, Draq5
From 111.00€ *
Review
Cyanine 7 monosuccinimidyl ester [equivalent to Cy7(R) NHS ester]
Cyanine 7 monosuccinimidyl ester [equivalent to Cy7(R)...

Item number: ABD-161

Ex: 749 nm. Em: 776 nm. Soluble in: DMSO. A variety of cyanine 7 (Cy7®) dyes has been used to label biological molecules for fluorescence imaging and other fluorescence-based biochemical analysis. They are widely used for labeling peptides, proteins and oligos etc. Cy7® dye conjugates are one type of the most common...
Application: Labeling probe, classic labeling dye, cyanine
MW: 881,11 D
145.00€ *
Review
DAX-J2(TM) Red
DAX-J2(TM) Red

Item number: ABD-16301

Ex: 588 nm. Em: 610 nm. Soluble in: DMSO. DAX-J2T Red is a new nitric oxide (NO) sensor recently developed by AAT Bioquest. It is a non-fluorescent cell permeable reagent that can measure free NO and nitric oxide synthase (NOS) activity in living cells under physiological conditions. Once inside the cell the...
Application: FC
MW: 608,77 D
218.00€ *
Review
Nuclear Orange(TM) DCS1
Nuclear Orange(TM) DCS1

Item number: ABD-17551

Our Nuclear Orange(TM) DCS1 is a non-fluorescent, DNA-selective and cell-impermeant dye for analyzing DNA content in dead, fixed or apoptotic cells. The Nuclear Orange(TM) LCS1 has its orange fluorescence significantly enhanced upon binding to DNA. It can be used in fluorescence imaging, microplate and flow...
Application: DNA content analysis
145.00€ *
Review
Fura-8(TM), pentapotassium salt  [was called "Fura-6"]
Fura-8(TM), pentapotassium salt [was called "Fura-6"]

Item number: ABD-21057

Ex: 354 nm. Em: 525 nm. Soluble in: Water. Although Fura-2 has been widely used as the preferred excitation-ratioable calcium indicator it has certain limitations, e.g., lower sensitivity compared to the single wavelength calcium dyes such as Fluo-8® and Cal-520T. AAT has recently developed Fura-8T to further...
Keywords: Fura-6
Application: HTS assays, Calcium GPCR assays
MW: 816,01 D
145.00€ *
Review
DiYO(TM)-3
DiYO(TM)-3

Item number: ABD-17581

Ex: 612 nm. Em: 631 nm. Soluble in: Water. DiYO(TM)-3 is chemically equivalent to YOYO(R)-3 (YOYO(R) is the trademark of Invitrogen). DiYO(TM)-3 is a carbocyanine dimer with far-red fluorescence similar to Cy(R) 5 dyes. It is cell-impermeant and easily distinguished from fluorescein and rhodamine as a nuclear...
Application: Biochemical assays, nucleic acid detection, DNA detection
CAS 156312-20-8
MW: 1322,73 D
291.00€ *
Review
Cal-520(TM) maleimide
Cal-520(TM) maleimide

Item number: ABD-20610

Ex: 492 nm. Em: 514 nm. Soluble in: DMSO. Calcium measurement is critical for numerous biological investigations. Fluorescent probes that show spectral responses upon binding calcium have enabled researchers to investigate changes in intracellular free calcium concentrations by using fluorescence microscopy, flow...
Application: IF, FC
MW: 946,77 D
581.00€ *
Review
Fura-FF, pentapotassium salt [Fura-2FF, pentapotassium salt]
Fura-FF, pentapotassium salt [Fura-2FF, pentapotassium salt]

Item number: ABD-21028

10x50 µg. Ex: 363 nm. Em: 512 nm. Soluble in: Water. Among the ratiometric calcium indicators, Fura-2 and Indo-1 are most commonly used. Fura-2 is excitation-ratioable while Indo-1 is emission-ratioable. Fura-2 is preferred for ratio-imaging microscopy, in which it is more practical to change excitation wavelengths...
Application: Cell-impermeant calcium indicator, HTS assays, Calcium GPCR assays
CAS 192140-58-2
MW: 853,94 D
291.00€ *
Review
iFluor(TM) 647 maleimide
iFluor(TM) 647 maleimide

Item number: ABD-1065

AAT Bioquest's iFluor(TM) dyes are optimized for labeling proteins, in particular, antibodies. These dyes are bright, photostable and have minimal quenching on proteins. They can be well excited by the major laser lines of fluorescence instruments (e.g., 350, 405, 488, 555 and 633 nm). iFluor(TM) 555 dyes have...
Application: Labeling
291.00€ *
Review
43 from 269 pages