Kisspeptin 1 (KISS1) BioAssay(TM) ELISA Kit Mouse

The Mouse Kisspeptin 1 (KISS1) ELISA Kit is a competitive inhibition immunoassay for in vitro quantitative measurement of KISS1 in mouse serum, plasma and other biological fluids. Detection Range: 12.35-1000pg/ml, Sensitivity: 4.46pg/ml, Test Principle: This assay employs the competitive inhibition enzyme immunoassay technique. A monoclonal antibody specific for KISS1 has been pre-coated onto a microplate. A competitive inhibition reaction occurs between biotin-labeled KISS1and unlabeled KISS1 (standards or samples) with the pre-coated antibody specific for KISS1. After incubation the unbound conjugate is washed off. Next, avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. The amount of bound HRP conjugate is inversely proportional to the concentration of KISS1 in the sample. After addition of the substrate solution, the intensity of color developed is inversely proportional to the concentration of NPS in the sample. Kit Components: *026392A: Microtiter Strip, 96-well strip plate. Pre-coated, ready to use, *026392B: Standard, 2x1vial , 026392C: Standard Diluent, 1x20ml, *026392D: Detection Reagent A, 1x120ul , *026392E: Detection Reagent B, 1x120ul , 026392F: Assay Diluent A, 1x12ml, 026392G: Assay Diluent B, 1x12ml, 026392H: TMB Substrate, 1x9ml, 026392K: Stop Solution, 1x6ml, 026392L: Wash Buffer, 30X, 1x20ml , Precaution:, The Stop Solution (026392K) suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material. Storage and Stability: Store *026392A, *026392B, *026392D and *026392E at -20°C. Store all the other components at 4°C. Unused kit is stable for 6 months. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap. Assay Procedure Summary: 1. Prepare all reagents, samples and standards., 2. Add 50ul standard or sample to each well, then add 50ul prepared Detection Reagent A immediately. Shake and mix. Incubate 1 hour at 37°C., 3. Aspirate and wash 3 times., 4. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C., 5. Aspirate and wash 5 times., 6. Add 90ul Substrate Solution. Incubate 15-25 minutes at 37°C., 7. Add 50ul Stop Solution. Read at 450 nm immediately.